Decanter instructions
August 8, 2024
No Comments
1| Important note before useFor a first use: Please check that all the decanter components are in place, including the topcap, wood body and infusion
1| Important note before use
For a first use: Please check that all the decanter components are in place, including the top
cap, wood body and infusion chamber. Fill the W.E.T decanter once with water to ensure
that all parts are in working order.
Wash the decanting chamber once with running water, then gently wash the inside of the
decanter with a gentle stream, then wipe down.
*Note to be careful not to wash the wood exterior excessively as wood can expand. Washing
is meant for the inside of the decanter.
Once this step is complete and you can insure that all parts are in working order you can
begin the fun process of making your own spirits 🙂
2 | Open bottom
Open the top cap and place on the table, now remove the bottom and remove the decanting
chamber from the bottom with a gentle twist. Now lay all components on the table and you
are ready to begin making magic 🙂
3 | Fill with spices
Fill the Decanting chamber with your choice of oak spheres, spices and herbs (see back for
some tips and fun suggestions)
4 | Assemble
Place the decanting chamber back in the bottom of the decanter, making sure it is firmly
sealed
5 | Fill with spirits
Now poor in your favorite spirits, whisky, rum, tequila, Vodka, get creative. Then close the
top cap.
Allow the creation to sit for as long as needed to infuse the spirits (See back for tips on
timing as well).
Once ready, just poor out your new creation and enjoy.
(a picture of decanter assembly)
1| Important note before useFor a first use: Please check that all the decanter components are in place, including the topcap, wood body and infusion
2024 Nisnas Industries. All rights reserved.
Unauthorized use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited.
